Anyone know how to make a bong easily? I want to smoke it that way becasue the water filters it so good. Any ideas without using tin-foil?
The screen goes over or under the marijuana? Whats a wrench peice? You mean like from a socket wrench? What size?
That all depends on how much weed you want to smoke in one session (bowl). 1/2 to 3/4 in diameter would be good. The screen goes in the bottom of the socket (make sure it is metal). then pack your marijuana on top of that until it fills the bowl. Also, try to use a metal stem, from a good pen or something, but a bick pen will work, just make sure it doesnt melt.....plastic fumes are nasty.
Get some clay and the roll from a paper towel roll. flatten some of the clay. Roll the paper towel roll inside the clay. Trim the clay from both ends flush with the ends of the roll. Take another piece of flattened clay and seal one end. Take a lump of clay and add it to the side, about 1/2 way up. Form a bowl in that lump. Use a coat hanger to run a hole from the bottom to the bowl into the cylender. Use a pencil to make a toke hole just above the level of the bowl. When you fire the clay, the paper tube will burn away. Conversly, you could slit the paper tube before forming the clay cylindar and carefuly remove it. Oiling the outside of the paper roll would help. Removing the paper roll would allow you to use a low fire clay or sculpty. This sounds complicated, but it is realy easy to do, but hard to describe. One guy formed it so that when the bong was placed upside down it look like a face, the nose was the bowl.
Are you able to roll a joint? If so u can make a hole in a 2 litre bottle, stick the joint in fill up the bottle with smoke by breathing in through the top, then toke it from there it will probley be quite harsh tho but u dont need to take all that at once anyway. And to toke u gotta make sure the litttle hole is open, Called the rush.
Carb higher than the inside end of the smoke hole. Otherwise the water will run out the carb hole and the smoke won't get to the water.
jesus why has it been so hard to get a decent answer here? its a bloody sotners forum no one has jsut asnwere dhte simple questions. to make everyhting easier and better, first get yourself an actual bowl. go get one of those metal pipes and tkae the bowl off that, or just buy an actual metal/brass bowl. these arent hard to find and make everything sooo easy. with a bowl, all u need now is a plastic bottle, some hose, and a lighter. thats ALL. following the basic scheme in that picture for positioning, hold the lighter near, but not on the bottle for a few seconds. youll see a small whiteness appear and that will turn into a hgole real quickly. when its smaller than the hose, but not too small, quickly jab the hose into it and push really hard. the tighter the better, but u dont want to push the bottle into a squished mess. push the hose to the bottom and rotate it so that it points in a good dieection when tis sticking out of the bottle. on teh other side, hold the lgihter close, in a suitable spot, and almost as soon as u see a hole developing, stop. u need a hole like 3-5 mm wide. put the little metal cone in the end of the hose. your first, totally airtight bong. if the bowl doesnt sit airtight, u can put some aluminium foil in aorund it, the foil doesnt actually touch teh flame or smoke so you wont have those problems of aluminium fumes. i hope that was easy to understand. btw u can get metal pipes from almsot any tobbaconist here in australia, and definately any head shop over in US. if yur too young and afraid to go try and buy it yourself, jsut get someone else to. ITS WORTH IT! thats how all bongs are made here in Sydney, and if you get a good bottle and good hose piece, the bong will work jsut as well and jsut as clean as any bong you would buy. plus they dont break, and are practically free. lol its commonly known aorund here that a shortening hose is the mark of a rebel stoner.
Try making a few cups of ice then chop up the ice in a blender untill its like snow then put that in your bong. you get the most amazing hits off it.
