Sugary treats.

Discussion in 'The Psychedelic Experience' started by The Real Peter Parker, Feb 13, 2010.

  1. The Real Peter Parker

    The Real Peter Parker Member

    Messages:
    569
    Likes Received:
    2
    I've been thinking about whether it would be possible to put some of my 2C-E in some hard candy, if it would be possible to pour a little bit of candy into the mold, put the dose of 2C-E on, then pour the rest on the mold. Would the amount of heat destroy the 2C-E though? How long would it be expected to last in the candy without losing potency if it's even possible?
     
  2. shermin

    shermin Bazooka Tooth

    Messages:
    3,674
    Likes Received:
    4
    don't put RC's in candy...that could get REALLY bad.
     
  3. Positive.Vibrations

    Positive.Vibrations Guest

    Messages:
    2
    Likes Received:
    0
    I think it would be a bad idea also. If they were even just set down and someone took a handfull and ate them on accident, that could turn out really really bad.
     
  4. FreshDacre

    FreshDacre Senior Member

    Messages:
    3,975
    Likes Received:
    20
    Yeah that's why you keep it away from people who don't know what it is. They do that all the time with LSD, why not do it with any other RC?
     
  5. The Real Peter Parker

    The Real Peter Parker Member

    Messages:
    569
    Likes Received:
    2
    Yeah, that's some type of answers. They aren't going into candy to trick anybody who doesn't know what it is. Nobody who doesn't know what it is, would ever even lay eyes on these candies, or know of their existence. That was supposed to be "understood," but I guess not.
     
  6. braindecay

    braindecay Member

    Messages:
    487
    Likes Received:
    0
    well, the thing is, you would have to do some research and figure out the melting point, and the vaporization point of the chemical you would be putting into the candy.

    the hard candy is easy, 1/2 cup sugar, 1/2 cup clear non flavoured caro corn syrup, and i believe 1/4 cup water. boil. heat to 102 (hard crack temp for candy, i.e. hard candy)
    remove from heat, add 2-3 drops of whatever flavor extract you want (baking section of grocery store) don't add too much or it will taste like asshole, less is better then too much. and a drop or two of food coloring if you want. this is where you would stir in the chem as well. you cant drop it in after otherwise the candy will harden and you will waste most of it and waste the chem trying to get it in.

    pour into a funnle with a stopper switch (buy at baking section of arts and crafts store where you would buy candy molds, same isle)

    drain into molds. you can also just drop it onto a baking sheet covered with wax paper if you don't want to buy a mold, but i highly reccomend the candy funnle because without it you will waste most of it due to hardening because you weren't fast enough.

    MAKE SURE YOU TRY THIS BEFORE YOU USE DRUGS IN IT BECAYSE YOU HAVE TO GO FAST AND PRACTICE IS NECCESSARY

    you just have to make sure the vaporization temp is lower then 102f.

    use a candy thermometer, they are 5 dollars from the grocery store in the baking section and you CANNOT estimate, it DOES NOT WORK!!!!

    if you go below 102 it won't harden, if you go slightly over, it will burn and all you will taste is burnt sugar. you will throw it out.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice