This is only a summary of the project. for step by step instructions check out http://howtobuildagrowroom.com/index.php?title=A_better_cheaper_pollen_sifter This is a very simple how to for a pollen sifter. An easy and clean way to get every last bit of goodness out of your plants. The thing I like most about this set up is that it is all self contained. I always seem to suffer allergies around harvest time, and once it is dried it is even worst. I used to use a jar with with silkscreen pulled accross the top and just shake above a glass table. All the time wearing a mask. On top of that I would have pollen everywhere for weeks. On the table, TV, speakers, baseboards. On top of the fact that it was a pain cleaning. This was all wasted goods. All you need to make one are 2 2 gallon buckets, a lid and a piece of silkscreen. Pretty much all you need to do is cut at the bottom of one bucket, then about 4" up. Lay the silkscreen flat under the 3 and a half inch piece of bucket you got and put in the top of the untouched bucket. Stretch the screen tight and fill it with your trim and shake shake shake. All the pollen is collected in the bottom bucket so nothing goes to waste.
all in all it was almost 2 lbs of trim/small popcorn nugs. I had the jar filled up, plus a whole lot of butter and BHO.
