Just finished my DMT extraction, but have a quick question

During the extraction, I used the quick and easiest DMT extraction ever- technique.

well first, I had the NaSO4-less solution (step b4 the NASO4) waiting for like 2 weeks. I duno if this would matter, but i didnt have any of it.

Also, When I used it, I was supposed to use like 35 g's, 1/2 of the recipe. I 4got, and used a lot more, like 85-90 g of NaSO4. The rest i did good (sucked up the clear naptha after adding it and the warm water or whatever.), but Im afraid I could be in turn smoking a hazardous material b/c the excessive NaSo4. I know the Naptha material was clear, but I duno if the NaSo4 got in it or something. It looks kinda liek NASO4, and not a chrystal like it maybe should, but I heard some people have that happen and I only freezed for 2 days.

So my question is.

Will the extra NaSO4 have any way of being in the final product?

(im asking cause i dont wanna be afraid, and have a bad trip)

Thanks!


http://bm.tribe.net/thread/4804ad46-1d78-418b-98b9-ae3621c86687

what i did (put extra naso4 tho, and waiting long time b4 adding it

 

you cant have a bad trip on DMT.. sorry.
But if you question is answered by itself.. There isnt anything left to harm you when you see crystals

did you follow a video tutor? if so then you should be fine..

 

there not really chrystals, more of a powery chrystal (not like pictures ont he net)

I didnt really answer my question myself, or I dont think I did. It basically comes down to this

I 1/2 the recipe Above (link-http://bm.tribe.net/thread/4804ad46-1d78-418b-98b9-ae3621c86687)

I was supposed to put 35g of NASO4. I put in around 90-100

Did the rest fine (also cleaned with the ammonium hydroxide or whatever)

Will the almost tripple NASO4 have Adverse affects. Can it, Is it posssible (Im no chemist...so I dont know)

 

Image to help

 

hummmm.. Well Im gona poke and say your DMT is full of salt, and thats why it looks powdery.
I dont know how you can pull that off, ...

Ok,, how spread out is your layer? maybe you have it clumped up in one location..
Could you seperate some with h20 in a new location and see if it spreads out?

 

just took those pics, i duno if you saw them

 

Oh see by the image now..

Well why dont you smoke some and find out..

 

I dont wanna die. Lol

I know NASO4 is toxic. Can it be toxic after the (naptha) separation, and the (ammonium)

 

Its really not suppose to be, but you do know that drugs of all types contain elements unknown..
what I would do, since your afraid to smoke some salt.. put some on a spoon and super heat it with a torch, when it starts to smoke inhale it through your nose. It shouldnt burn your nose. It should smell like plastic. not like chemical or carbon.
Move on to better smoking device when you not chicken.., :hat:j/k..

 

on that big glass table, mix some with water and then hair dry the water off.. I bet it crystallizes.. Least I hope it does..

 

haha just tried, b4 u posted too, haha, with a water pipe. First time, and I didnt do enough (or did it partially wrong) but def felt the effects. and i didnt DIE! going to try it tomorrow, maybe a little more, and not using it with a water pipe

thanks

 

I am trying to figure out why you are using Sodium Sulfate? Is that what you used as you acid? or were you referring to Sodium Hydroxide(NaOH)? I see that you got it to work out, but wanted to know if you did use the Sodium Sulfate at what point did you use it. and When did you base it out?

 

I think he got it confused with NaOH.

You seem to have gotten a perfectly fine product there. If anything, you just need to recrystallize and maybe do a sodium carbonate wash (with the DMT dissolved in naptha.)

 

Thanks 36F5,

 

Looks fine to me, and if you tested a little and got the rffects, I sure your fine.

:cheers2: