Socket Wrench Pipe?

I have a bit from a socket wrench set and i looks like it could be the perfect bowl. What should i attach it to to make the rest of the pipe?

 

A toilet paper tube.

poke a hole in the tube then use the socket to widen the whole just enough to hold the socket in place. very easy, very big hit.

 

But ill have a lighter next to cardboard and ill be high?

 

Is there anything that will fit so that I can have a semi-permanant piece?

 

tire guage, Most fits are square.. How you fit a pipe (circular) into a square and get a air tight seal.. Pressure and luck..

 

Tire Guage? What is that?

 

ok?

 

Ill end up with my hand on fire if i do that.

 

gauge.. sorry Im dzylesic..

 

like what you measure air pressure with?

 

yes...

 

ok thanx

 

Well where is you pipe dood??
typically your socket is Hardened Steel, It would take alot of heat to get it hot Hot HOt to burn you...
you could do just as willy says, wrap some tape around the socket to keep it from falling all the ways through the hole in the cardboard tissue roll..
It would not get that hot, you could wrap it with some ugly tape tooo.. Just for a the hell of it. If your going Ghetto then get funky..

 

Yea i ended up being lazy and taping it to a metal pipe tube. It actually works nice.

 

What you need to get is this pen. They're about seven or eight bucks and can be found at Office Max or just about any other office supply store.

http://www.discountofficeitems.com/...ar13332-office-products-10280.html?ref=nextag

My first pipe was made out of one of these and a socket wrench piece and it worked great. All you have to do is unscrew the pen and take the ink cartridge out. Then take the longer piece and bend the sides of where it screws in to make a square shape to fit in the socket. Then pound it in with a hammer. You now have a metal one hitter that can be stuck into a plastic bottle to make a bong. Just as a precaution you should wash all the one hitters parts in very hot water to rid it of any chemicals. Happy smoking.

 

Take a chap stick container, pull all the chap stick out, pull out the slider inside, put the socket in one end of the chap stick the put the cover back on over it and the back peice back in. You now have a concealed pipe, when you're ready, pull off covers and toke it up! Its bad cause the plastic might get hot and put off chemicals, but i've done it for over a year and its all good. Just for a quick high when you have no peice.


PS all my friends love this idea ha, if need be I could post pictures.

 

I once made a pipe with a metal lipstick tube i found, I was really young too..
It was weird, it had textures on it, Ill bet it was worth alot of money too..
Anyways I took it apart and made like a large dug out with it.. put a foil screen in it...

 

gravity bong.

 

is it just me or has the youth of the world lost all creativity?

 

haha no, it's just the herb kinda took the care away to worry about fancy stuff.