Can Anyone Figure This Out?????

Leave one bulb out, put two light bulbs with different watts in the sockets. go outside (leave the door open) flip the switches and look at which one is brighter.


Maybe??????

 

Just flip on the two outside switches and the leave the middle one off. Off course, that all depends on how the lights are wired.

 

how about using a jack hammer to blast your way through the wall...that way your not using the door, but you can still go outside. or you could jsut follow the wiring back to its repective switch, but blasting a hole through the wall seems like more fun.

 

This is simple. Number the switches 1, 2 &3. Turn on switch one for five minutes, then turn it off, turn on switch 2 and go through the door. The dark bulb that is still hot to the touch is connected to switch one. The lighted bulb is connected to switch 2 and the cool bulb is connected to switch 3.

 

Oh, I see jugg has also come up with the same answer. Great job jugg! That's the only way to make it work.

 

what's wrong with my answer? I think you are making up rules...

 

wow I didnt expect Juggalo to get this one.

I was dumbfounded for awhile, until I called my brother. This would work, but it could also work by turning on two light switches and leaving it on for a good 5-10 minutes or so. Then turn one of those light switches off. When you go inside, the light that is on is to the light switch that is turned on. The light that is cold is the light switch you didnt touch, and the light that is warm, but not on is the one that you turned on for 5-10 minutes, and then switched off.

voila.

 

know1nozme got it too! good job. but I think juggalo was first.

 

This is highly useful information I better write it down *rolls eyes*

 

now this is all asumming you could reach the light bulbs... more description was needed but it was still good